Friday, September 2, 2022

La Dame Du Lac

Unfortunately during turn over the crew was rather busy and no one thought to take pictures.  You can see the upright pole with the chain from the hoist.  The strap runs around the boat and as the boat is turned the strap slides through the hook on the hoist chain.
A picture of the bow showing the strap running through the chain hoist hook.  Once the boat was level we added blocking along the building frame to stabilize the hull.
A stern view showing the #4 helm bulkhead and #8 bulkhead which was installed in lue of the transom.  The transom will be fit between the two girders seen in the bottom of the photo. 
Looking forward with the cockpit sole and hatch covers installed.  The shape of the bow is still a work in progress.
 

By David W Johnson at

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)

Completed motor cover with 2' mahogany overy strips. Sealed with penetrating epoxy   Motor cover installed. Portable work table with min...

  • La Dame Du Lac
    Starting to frame the cuddy deck.  I opted to eliminate the camber which made the framing much easier. The photo shows the transom in the mo...
  • La Dame Du Lac
    The hull receives two layers of 6mm marine plywood bonded with thickened epoxy and synthetic staples.  The perimeter is screwed with SS scre...
  • La Dame Du Lac
    Unfortunately during turn over the crew was rather busy and no one thought to take pictures.  You can see the upright pole with the chain fr...