Thursday, December 1, 2022

Completed motor cover with 2' mahogany overy strips. Sealed with penetrating epoxy
 
Motor cover installed.


Portable work table with miniature 3" table saw for all those miter cuts.

Laying down the Mahogany overlay strips on the bow.


By David W Johnson at No comments:


 Taking La Dame Du Lac to the Motor Dealer to have Honda 60 hp outboard installed.
Motor well was two small and would not allow for proper clearance.  Back to the shop for modifications.

Reframed the opening plus added furring and a new 3/4" plywood overlay.
Frame set up for motor cover. Will Receive two layers of 1/4" plywood and wood trim.

By David W Johnson at No comments:
Subscribe to: Posts (Atom)

Completed motor cover with 2' mahogany overy strips. Sealed with penetrating epoxy   Motor cover installed. Portable work table with min...

  • La Dame Du Lac
    Starting to frame the cuddy deck.  I opted to eliminate the camber which made the framing much easier. The photo shows the transom in the mo...
  • La Dame Du Lac
    The hull receives two layers of 6mm marine plywood bonded with thickened epoxy and synthetic staples.  The perimeter is screwed with SS scre...
  • La Dame Du Lac
    Unfortunately during turn over the crew was rather busy and no one thought to take pictures.  You can see the upright pole with the chain fr...